Home EV charging
Enphase IQ EV Charger 2

EV charging,
built around your solar

The Enphase IQ EV Charger 2 charges your car on your own sunshine — automatically adapting to what your panels make and your home uses. Installed across the greater Tampa Bay area by a Florida Master Electrician.

Up to 11.5 kW 34–77 mi range / hr NACS & J1772 NEMA 4 weatherproof
Enphase IQ EV Charger 2 with charging cable and the Enphase mobile app
11.5 kW
max charging power
34–77
miles of range per hour
25 ft
cable reaches any spot
5 yr
limited warranty

Why pair it with solar

Drive on sunshine, not the grid

An EV is the biggest load you can add to a home. The IQ EV Charger 2 watches your solar production and home usage in real time and charges your car with your excess solar first — so your miles come off your own roof instead of the grid. And because it's an Enphase device, it lives in the same app as your panels and battery.

Solar-aware charging

Automatically adapts to sunlight and home energy use, prioritizing your own solar over grid power.

Built-in load balancing

Shares power intelligently with your home — often avoiding a $3,000–$5,000 electrical panel upgrade.

Enphase home energy system — solar microinverters, battery, meter collar, and the IQ EV Charger 2 working together, monitored in the Enphase app

Smart. Durable. Future-ready.

Why we install the IQ EV Charger 2

It's not just a faster plug — it's a smarter one, built to work with solar and to last through Florida weather.

Charge for less, automatically

Schedule charging for the lowest-rate hours, or let it soak up midday solar — so you fuel up at a fraction of gas-station cost.

Storm Guard ready

When severe weather is on the way, your car can top off automatically — so you're never caught with a low battery before a storm.

Works with every EV

Available with NACS or J1772 cables — and the cable is replaceable, so the charger keeps up as standards evolve.

One app for everything

Monitor and control charging right alongside your panels and battery in the Enphase App — with a revenue-grade meter accurate to ±1%.

Access control

App-based or RFID access keeps charging secure — handy for shared driveways and multi-vehicle households.

Built for Florida weather

A fully weather-sealed NEMA 4 enclosure rated from -40°F to 131°F and power-tested for 10,000 hours in damp heat.

Specifications

Enphase IQ EV Charger 2 — at a glance

Max power outputUp to 11.5 kW (48 A hardwired)
Plug-in optionUp to 9.6 kW (40 A, NEMA 14-50)
Charging speed34–77 miles of range per hour
ConnectorNACS & J1772 (replaceable cable)
Cable length25 ft
EnclosureNEMA 4, fully weather-sealed
Operating temperature-40°F to 131°F
ConnectivityWi-Fi, LTE, Ethernet, Bluetooth, CAN
MeteringRevenue-grade, ±1% accuracy
CertificationUL certified
Warranty5-year limited

Installed right, by the electrician who knows your panel

An EV charger draws serious current. As a Florida Master Electrician, William May verifies your panel capacity, sizes the circuit, and pulls the permit — no guesswork, no sub-contractors. And because the IQ EV Charger 2 balances its own load, many homes skip the costly service upgrade entirely. Add it to a new solar + battery project and we engineer the whole system to work together.

Add the IQ EV Charger 2 to your project

Whether it's a single home charger or solar + battery + EV all at once, we'll design it as one Enphase system. Get a free, honest quote.

Get my free quote